AZ 801 Exam study Guide

Lab: Implementing hybrid networking infrastructure

Scenario

You were tasked with building a test environment in Azure, consisting of Microsoft Azure virtual machines deployed into separate virtual networks configured in the hub and spoke topology. This testing must include implementing connectivity between spokes by using user-defined routes that force traffic to flow via the hub. You also need to implement DNS name resolution for Azure virtual machines between virtual networks by using Azure private DNS zones and evaluate the use of Azure DNS zones for external name resolution.

Note: An interactive lab simulation is available that allows you to click through this lab at your own pace. You may find slight differences between the interactive simulation and the hosted lab, but the core concepts and ideas being demonstrated are the same.

Objectives

After completing this lab, you’ll be able to:

  • Implement virtual network routing in Azure
  • Implement DNS name resolution in Azure
  • Deprovision the Azure environment

Estimated time: 60 minutes

Lab setup

Virtual machines: AZ-800T00A-SEA-DC1 and AZ-800T00A-ADM1 must be running. Other VMs can be running, but they aren’t required for this lab.

Note: AZ-800T00A-SEA-DC1 and AZ-800T00A-SEA-ADM1 virtual machines are hosting the installation of SEA-DC1 and SEA-ADM1

  1. Select SEA-ADM1.
  2. Sign in using the following credentials:
    • Username: Administrator
    • Password: Pa55w.rd
    • Domain: CONTOSO

For this lab, you’ll use the available VM environment and an Azure subscription. Before you begin the lab, ensure that you have an Azure subscription and a user account with the Owner or Contributor role in that subscription.

Note: This lab, by default, requires a total of 6 vCPUs available in the Standard_Dsv3 series in the region you choose for deployment because it involves deployment of three Azure VMs of Standard_D2s_v3 SKU. If you are using a free Azure account, with the limit of 4 vCPUs, you can use a VM size that requires only one vCPU (such as Standard_B1s).

Exercise 1: Implement virtual network routing in Azure

Scenario

You will start by deploying core network infrastructure using an Azure Resource Manager template, configuring custom routing within that infrastructure, and validating its functionality.

The main tasks for this exercise are as follows:

  1. Provision lab infrastructure resources
  2. Configure the hub and spoke network topology
  3. Test transitivity of virtual network peering
  4. Configure routing in the hub and spoke topology

Task 1: Provision lab infrastructure resources

In this task, you will deploy three virtual machines into the same Azure region but into separate virtual networks. The first virtual network will serve as a hub, while the other two will form spokes. These resources will serve as the basis for the lab infrastructure.

  1. Connect to SEA-ADM1, and then, if needed, sign in as CONTOSO\Administrator with a password of Pa55w.rd.
  2. On SEA-ADM1, start Microsoft Edge, browse to the Azure portal at https://portal.azure.com, and sign in by using the credentials of a user account with the Owner role in the subscription you’ll be using in this lab.
  3. In the Azure portal, open a PowerShell session in the Cloud Shell pane.
  4. Upload the files C:\Labfiles\Lab08\L08-rg_template.json and C:\Labfiles\Lab08\L08-rg_template.parameters.json into the Cloud Shell home directory.
  5. From the Cloud Shell pane, run the following commands to create the first resource group that will be hosting the lab environment (replace the <Azure_region> placeholder with the name of an Azure region that you intend to use for the deployment):

    Note: You can run the (Get-AzLocation).Location command to list the names of available Azure regions:

    Code
     $location = '<Azure_region>'
 $rgName = 'AZ800-L0801-RG'
 New-AzResourceGroup -Name $rgName -Location $location
  6. From the Cloud Shell pane, run the following command to create the three virtual networks and four Azure VMs into them by using the template and parameter files you uploaded:
    Code
    New-AzResourceGroupDeployment `
   -ResourceGroupName $rgName `
   -TemplateFile $HOME/L08-rg_template.json `
   -TemplateParameterFile $HOME/L08-rg_template.parameters.json

    Note: Wait for the deployment to complete before proceeding to the next step. This should take about 3 minutes.

  7. From the Cloud Shell pane, run the following commands to install the Network Watcher extension on the Azure VMs deployed in the previous step:
    Code
    $rgName = 'AZ800-L0801-RG'
$location = (Get-AzResourceGroup -ResourceGroupName $rgName).location
$vmNames = (Get-AzVM -ResourceGroupName $rgName).Name

foreach ($vmName in $vmNames) {
  Set-AzVMExtension `
  -ResourceGroupName $rgName `
  -Location $location `
  -VMName $vmName `
  -Name 'networkWatcherAgent' `
  -Publisher 'Microsoft.Azure.NetworkWatcher' `
  -Type 'NetworkWatcherAgentWindows' `
  -TypeHandlerVersion '1.4'
}

    Note: Do not wait for the deployment to complete but instead proceed to the next step. The installation of the Network Watcher extension should take about 5 minutes.

Task 2: Configure the hub and spoke network topology

In this task, you will configure local peering between the virtual networks you deployed in the previous tasks to create a hub and spoke network topology.

  1. On SEA-ADM1, in the Microsoft Edge window displaying the Azure portal, open another tab and browse to the Azure portal at https://portal.azure.com.
  2. In the Azure portal, browse to the az800l08-vnet0 virtual network page.
  3. From the az800l08-vnet0 virtual network page, create a peering with the following settings (leave others with their default values):
    SettingValue
    This virtual network: Peering link nameaz800l08-vnet0_to_az800l08-vnet1
    Traffic to remote virtual networkAllow (default)
    Traffic forwarded from remote virtual networkAllow (default)
    Virtual network gateway or Route ServerNone (default)
    Remote virtual network: Peering link nameaz800l08-vnet1_to_az800l08-vnet0
    Virtual network deployment modelResource manager
    Remote virtual network: Virtual networkaz800l08-vnet1
    Traffic to remote virtual networkAllow (default)
    Traffic forwarded from remote virtual networkAllow (default)
    Virtual network gatewayNone (default)

    Note: Wait for the operation to complete.

    Note: This step establishes two peerings – one from az800l08-vnet0 to az800l08-vnet1 and the other from az800l08-vnet1 to az800l08-vnet0.

    Note: Allow forwarded traffic needs to be enabled in order to facilitate routing between spoke virtual networks, which you will implement later in this lab.

  4. Repeat the previous step to add a peering with the following settings (leave others with their default values):
    SettingValue
    This virtual network: Peering link nameaz800l08-vnet0_to_az800l08-vnet2
    Traffic to remote virtual networkAllow (default)
    Traffic forwarded from remote virtual networkAllow (default)
    Virtual network gatewayNone (default)
    Remote virtual network: Peering link nameaz800l08-vnet2_to_az800l08-vnet0
    Virtual network deployment modelResource manager
    Remote virtual network: Virtual networkaz800l08-vnet2
    Traffic to remote virtual networkAllow (default)
    Traffic forwarded from remote virtual networkAllow (default)
    Virtual network gatewayNone (default)

    Note: This step establishes two peerings – one from az800l08-vnet0 to az800l08-vnet2 and the other from az800l08-vnet2 to az800l08-vnet0. This completes setting up the hub and spoke topology (with the az800l08-vnet0 virtual network serving the role of the hub, while az800l08-vnet1 and az800l08-vnet2 are its spokes).

Task 3: Test transitivity of virtual network peering

In this task, you will test connectivity across virtual network peerings by using Network Watcher.

Note: Before you start this task, make sure that the script you invoked in the first task of this exercise completed successfully.

  1. In the Azure portal, browse to the Network Watcher page.
  2. From the Network Watcher – Connection troubleshoot page, initiate a check with the following settings (leave others with their default values):
    SettingValue
    Subscriptionthe name of the Azure subscription you are using in this lab
    Resource groupAZ800-L0801-RG
    Source typeVirtual machine
    Virtual machineaz800l08-vm0
    DestinationSpecify manually
    URI, FQDN or IPv410.81.0.4
    ProtocolTCP
    Destination Port3389

    Note: 10.81.0.4 represents the private IP address of az800l08-vm1. The test uses the TCP port 3389 because Remote Desktop is by default enabled on Azure virtual machines and accessible within and between virtual networks.

  3. Wait until results of the connectivity check are returned. Verify that the status is Reachable. Review the network path and note that the connection was direct, with no intermediate hops in between the VMs.

    Note: This is expected because the hub virtual network is peered directly with the first spoke virtual network.

  4. From the Network Watcher – Connection troubleshoot page, initiate another check with the following settings (leave others with their default values):
    SettingValue
    Subscriptionthe name of the Azure subscription you are using in this lab
    Resource groupAZ800-L0801-RG
    Source typeVirtual machine
    Virtual machineaz800l08-vm0
    DestinationSpecify manually
    URI, FQDN or IPv410.82.0.4
    ProtocolTCP
    Destination Port3389

    Note: 10.82.0.4 represents the private IP address of az800l08-vm2.

  5. Select Check and wait until results of the connectivity check are returned. Verify that the status is Reachable. Review the network path and note that the connection was direct, with no intermediate hops in between the VMs.

    Note: This is expected because the hub virtual network is peered directly with the second spoke virtual network.

  6. From the Network Watcher – Connection troubleshoot page, initiate yet another check with the following settings (leave others with their default values) and initiate another check:

    Note: You might need to refresh the browser page for the virtual machine az800l08-vm1 to appear in the Virtual machine drop-down list.

    SettingValue
    Subscriptionthe name of the Azure subscription you are using in this lab
    Resource groupAZ800-L0801-RG
    Source typeVirtual machine
    Virtual machineaz800l08-vm1
    DestinationSpecify manually
    URI, FQDN or IPv410.82.0.4
    ProtocolTCP
    Destination Port3389
  7. Wait until results of the connectivity check are returned. Note that the status is Unreachable.

    Note: This is expected because the two spoke virtual networks are not peered with each other and virtual network peering is not transitive.

Task 4: Configure routing in the hub and spoke topology

In this task, you will configure and test routing between the two spoke virtual networks by enabling IP forwarding on the network interface of the az800l08-vm1 virtual machine, enabling routing within its operating system, and configuring user-defined routes on the spoke virtual network.

  1. In the Azure portal, browse to the page of the az800l08-vm0 virtual machine.
  2. On the az800l08-vm0 virtual machine page, browse to the page displaying settings of its network interface az800l08-nic0.
  3. On the az800l08-nic0 network interface page, display its IP configurations page and enable IP forwarding.

    Note: This setting is required for az800l08-vm0 to function as a router, which will route traffic between two spoke virtual networks.

    Note: Now you need to configure the operating system of the az800l08-vm0 virtual machine to support routing.

  4. In the Azure portal, browse back to the az800l08-vm0 virtual machine page and use the RunPowerShellScript from the list of Run command operations to run the following command that install the Remote Access Windows Server role.
    Code
    Install-WindowsFeature RemoteAccess -IncludeManagementTools

    Note: Wait for the confirmation that the command completed successfully.

  5. Use the RunPowerShellScript again to install the Routing role service by running the following commands:
    Code
    Install-WindowsFeature -Name Routing -IncludeManagementTools -IncludeAllSubFeature
Install-WindowsFeature -Name "RSAT-RemoteAccess-Powershell"
Install-RemoteAccess -VpnType RoutingOnly
Get-NetAdapter | Set-NetIPInterface -Forwarding Enabled

    Note: Wait for the confirmation that the command completed successfully.

    Note: Now you need to create and configure user-defined routes on the spoke virtual networks.

  6. In the Azure portal, browse to the Route tables and create a route table with the following settings (leave others with their default values):
    SettingValue
    Subscriptionthe name of the Azure subscription you are using in this lab
    Resource groupAZ800-L0801-RG
    Locationthe name of the Azure region in which you created the virtual networks
    Nameaz800l08-rt12
    Propagate gateway routesNo

    Note: Wait for the route table to be created. This should take about 1 minute.

  7. Browse to the page of the newly created route table az800l08-rt12 and add a route with the following settings:
    SettingValue
    Route nameaz800l08-route-vnet1-to-vnet2
    Address prefix10.82.0.0/20
    Next hop typeVirtual appliance
    Next hop address10.80.0.4

    Note: 10.80.0.4 represents the private IP address of az800l08-vm0.

  8. On the az800l08-rt12 route table page, associate the route table az800l08-rt12 with the following subnet:
    SettingValue
    Virtual networkaz800l08-vnet1
    Subnetsubnet0
  9. Browse back to Route tables page and create another route table with the following settings (leave others with their default values):
    SettingValue
    Subscriptionthe name of the Azure subscription you are using in this lab
    Resource groupAZ800-L0801-RG
    Regionthe name of the Azure region in which you created the virtual networks
    Nameaz800l08-rt21
    Propagate gateway routesNo

    Note: Wait for the route table to be created. This should take about 3 minutes.

  10. Browse to the az800l08-rt21 route table page and add a route with the following settings:
    SettingValue
    Route nameaz800l08-route-vnet2-to-vnet1
    Address prefix10.81.0.0/20
    Next hop typeVirtual appliance
    Next hop address10.80.0.4
  11. On the az800l08-rt21 route table page, associate the route table az800l08-rt21 with the following subnet:
    SettingValue
    Virtual networkaz800l08-vnet2
    Subnetsubnet0
  12. In the Azure portal, browse back to the Network Watcher – Connection troubleshoot page and initiate a check with the following settings (leave others with their default values):
    SettingValue
    Subscriptionthe name of the Azure subscription you are using in this lab
    Resource groupAZ800-L0801-RG
    Source typeVirtual machine
    Virtual machineaz800l08-vm1
    DestinationSpecify manually
    URI, FQDN or IPv410.82.0.4
    ProtocolTCP
    Destination Port3389
  13. Wait until the results of the connectivity check are returned. Verify that the status is Reachable. Review the network path and note that the traffic was routed via 10.80.0.4, assigned to the az800l08-nic0 network adapter.

    Note: This is expected because the traffic between spoke virtual networks is now routed via the virtual machine located in the hub virtual network, which functions as a router.

Exercise 2: Implement DNS name resolution in Azure

Scenario

With the custom routing successfully tested, now it’s time to implement DNS name resolution for Azure virtual machines between virtual networks by using Azure private DNS zones and evaluate the use of Azure DNS zones for external name resolution.

The main tasks for this exercise are as follows:

  1. Configure Azure private DNS name resolution
  2. Validate Azure private DNS name resolution
  3. Configure Azure public DNS name resolution
  4. Validate Azure public DNS name resolution

Task 1: Configure Azure private DNS name resolution

In this task, you will configure DNS name resolution between virtual networks by using an Azure private DNS zone.

  1. On SEA-ADM1, in the Microsoft Edge window displaying the Azure portal, browse to the Private DNS zones page.
  2. Create a private DNS zone with the following settings:
    SettingValue
    Subscriptionthe name of the Azure subscription you are using in this lab
    Resource groupthe name of a new resource group AZ800-L0802-RG
    Namecontoso.org
    Resource group locationthe same Azure region into which you deploy resources in the previous exercise of this lab

    Note: Wait for the private DNS zone to be created. This should take about 2 minutes.

  3. Browse to the contoso.org DNS private zone page.
  4. On the contoso.org private DNS zone page, add a virtual network link to the first virtual network you created in the previous exercise with the following settings (leave others with their default values):
    SettingValue
    Link nameaz800l08-vnet0-link
    Subscriptionthe name of the Azure subscription you are using in this lab
    Virtual networkaz800l08-vnet0 (AZ800-L0801-RG)
    Enable auto registrationselected

    Note: Wait for the virtual network link to be created. This should take less than 1 minute.

  5. Repeat the previous step to create virtual network links (with auto registration enabled) named az800l08-vnet1-link and az800l08-vnet2-link for the virtual networks az800l08-vnet1 and az800l08-vnet2, respectively.
  6. On the contoso.org private DNS zone page, browse to the Overview pane of the contoso.org private DNS zone page, review the listing of DNS record sets and verify that the A records of az800l08-vm0, az800l08-vm1, and az800l08-vm2 appear in the list as Auto registered.

    Note: You might need to wait a few minutes and refresh the page if the record sets are not listed.

Task 2: Validate Azure private DNS name resolution

In this task, you will validate Azure private DNS name resolution.

  1. On SEA-ADM1, in the Microsoft Edge window displaying the Azure portal, browse back to the Network Watcher – Connection troubleshoot page.
  2. Initiate a check with the following settings (leave others with their default values):
    SettingValue
    Subscriptionthe name of the Azure subscription you are using in this lab
    Resource groupAZ800-L0801-RG
    Source typeVirtual machine
    Virtual machineaz800l08-vm1
    DestinationSpecify manually
    URI, FQDN or IPv4az800l08-vm2.contoso.org
    Preferred IP VersionIPv4
    ProtocolTCP
    Destination Port3389
  3. Wait until the results of the connectivity check are returned. Verify that the status is Reachable.

    Note: This is expected because the target fully qualified domain name (FQDN) is resolvable via Azure private DNS zone.

Task 3: Configure Azure public DNS name resolution

In this task, you will configure external DNS name resolution by using Azure public DNS zones.

  1. On SEA-ADM1, in the Microsoft Edge window displaying the Azure portal, open a new tab and browse to https://www.godaddy.com/domains/domain-name-search.
  2. Use the domain name search to identify a domain name which is not currently in use.
  3. On SEA-ADM1, switch to the Microsoft Edge tab displaying the Azure portal and browse to the DNS zones page.
  4. Create a DNS zone with the following settings (leave others with their default values):
    SettingValue
    Subscriptionthe name of the Azure subscription you are using in this lab
    Resource GroupAZ800-L0802-RG
    Namethe DNS domain name you identified earlier in this task

    Note: Wait for the DNS zone to be created. This should take about 1 minute.

  5. Browse to the page of the newly created DNS zone.
  6. Add a record set with the following settings (leave others with their default values):
    SettingValue
    Namewww
    TypeA
    Alias record setNo
    TTL1
    TTL unitHours
    IP address20.30.40.50

    Note: The IP address and the corresponding name are entirely arbitrary. They are meant to provide a very simple example illustrating implementing public DNS records, rather than emulate a real world scenario, which would require purchasing a namespace from a DNS registrar.

  7. On the DNS zone page, identify the full name of Name server 1.

    Note: Record the full name of Name server 1. You will need it in the next task.

Task 4: Validate Azure public DNS name resolution

In this task, you will validate external DNS name resolution by using Azure public DNS zones.

  1. On SEA-ADM1, on the Start menu, select Windows PowerShell.
  2. In the Windows PowerShell console, run the following command to test the external name resolution of the www DNS record set in the newly created DNS zone (replace the placeholder <Name server 1> with the name of Name server 1 you noted earlier in this task and the <domain name> placeholder with the name of the DNS domain you created earlier in this task):
    Code
    nslookup www.<domain name> <Name server 1>
  3. Verify that the output of the command includes the public IP address of 20.30.40.50.

    Note: The name resolution works as expected because the nslookup command allows you to specify the IP address of the DNS server to query for a record (which, in this case, is <Name server 1>. For the name resolution to work when querying any publicly accessible DNS server, you would need to register the domain name with a DNS registrar and configure the name servers listed on the public DNS zone page in the Azure portal as authoritative for the namespace corresponding to that domain.

Exercise 3: Deprovisioning the Azure environment

Task 1: Start a PowerShell session in Cloud Shell

  1. On SEA-ADM1, switch to the Microsoft Edge window displaying the Azure portal.
  2. From the Azure portal, open a PowerShell session in the Cloud Shell pane.

Task 2: Identify all Azure resources provisioned in the lab

  1. From the Cloud Shell pane, run the following command to list all resource groups created throughout this lab:
    Code
    Get-AzResourceGroup -Name 'AZ800-L08*'
  2. Run the following command to delete all resource groups you created throughout this lab:
    Code
    Get-AzResourceGroup -Name 'AZ800-L08*' | Remove-AzResourceGroup -Force -AsJob

    Note: The command executes asynchronously (as determined by the -AsJob parameter), so while you’ll be able to run another PowerShell command immediately afterwards within the same PowerShell session, it will take a few minutes before the resource groups are actually removed.

Results

After completing this lab, you will have:

  • Provisioned the lab environment.
  • Configured the hub and spoke network topology.
  • Tested transitivity of virtual network peering.
  • Configured routing in the hub and spoke topology.
  • Configured Azure DNS for internal name resolution.
  • Configured Azure DNS for external name resolution.

Leave A Comment

Certifs IT Library

Explore our comprehensive web library to Find a wealth of invaluable resources, including extensive documentation and hands-on labs.

Inscription ouverte pour la formation Vmware VCP-DCV 2024
Mai 2024