Lab answer key: Migrating Hyper-V VMs to Azure by using Azure Migrate

Note: An interactive lab simulation is available that allows you to click through this lab at your own pace. You may find slight differences between the interactive simulation and the hosted lab, but the core concepts and ideas being demonstrated are the same.

Note: You may need to install the latest version of the Microsoft Edge browser. To update the Microsoft Edge browser, select the three dots (ellipsis) icon in the upper-right corner of the window. Select Help and feedback from the dropdown menu, then select About Microsoft Edge. Edge will automatically check for updates and download any available updates, once the update is downloaded, click on the Restart

Exercise 1: Prepare the lab environment

Task 1: Deploy an Azure VM by using an Azure Resource Manager QuickStart template

1. Connect to SEA-SVR2 and then, if needed, sign in as CONTOSO\Administrator with the password Pa55w.rd.
2. On SEA-SVR2, start Microsoft Edge, go to the 301-nested-vms-in-virtual-network Azure QuickStart template and select Deploy to Azure. (You’ll find the button Deploy to Azure in the README.md file after the list of resources created by the template.) This will automatically redirect the browser to the Hyper-V Host Virtual Machine with nested VMs page in the Azure portal.
3. When prompted, in the Azure portal, sign in by using the credentials of a user account with the Owner role in the subscription you’ll be using in this lab.
4. On the Hyper-V Host Virtual Machine with nested VMs page in the Azure portal, specify the following settings (Leave others with their default values.):
   

   Setting	Value
   Subscription	the name of the Azure subscription you are using in this lab
   Resource group	the name of a new resource group AZ801-L0701-RG
   Region	the name of an Azure region into which you can provision Azure VMs
   Virtual Network Name	az801l07a-hv-vnet
   Host Network Interface1Name	az801l07a-hv-vm-nic1
   Host Network Interface2Name	az801l07a-hv-vm-nic2
   Host Virtual Machine Name	az801l07a-hv-vm
   Host Admin Username	Student
   Host Admin Password	Pa55w.rd1234

5. On the Hyper-V Host Virtual Machine with nested VMs page, select Review + create and then select Create.
   

   Note: Wait for the deployment to complete. The deployment might take about 10 minutes.

Task 2: Deploy Azure Bastion

Note: Azure Bastion allows for connection to the Azure VMs without public endpoints which you deployed in the previous task of this exercise, while providing protection against brute force exploits that target operating system level credentials.

1. On SEA-SVR2, in the browser window displaying the Azure portal, open the Azure Cloud Shell pane by selecting the Cloud Shell button in the Azure portal.
2. If prompted to select either Bash or PowerShell, select PowerShell.
   

   Note: If this is the first time you’re starting Cloud Shell and you’re presented with the You have no storage mounted message, select the subscription you are using in this lab, and then select Create storage.

3. From the PowerShell session on the Cloud Shell pane, run the following commands to add a subnet named AzureBastionSubnet to the virtual network az801l07a-hv-vnet you created earlier in this exercise:
   CodeCopy

   $resourceGroupName = 'AZ801-L0701-RG'
   $vnet = Get-AzVirtualNetwork -ResourceGroupName $resourceGroupName -Name 'az801l07a-hv-vnet'
   $subnetConfig = Add-AzVirtualNetworkSubnetConfig `
    -Name 'AzureBastionSubnet' `
    -AddressPrefix 10.0.7.0/24 `
    -VirtualNetwork $vnet
   $vnet | Set-AzVirtualNetwork
   

4. Close the Cloud Shell pane.
5. In the Azure portal, in the Search resources, services, and docs text box, on the toolbar, search for and select Bastions and then, on the Bastions page, select + Create.
6. On the Basic tab of the Create a Bastion page, specify the following settings and select Review + create:
   

   Setting	Value
   Subscription	the name of the Azure subscription you are using in this lab
   Resource group	AZ801-L0701-RG
   Name	az801l07a-bastion
   Region	the same Azure region to which you deployed the resources in the previous tasks of this exercise
   Tier	Basic
   Virtual network	az801l07a-hv-vnet
   Subnet	AzureBastionSubnet (10.0.7.0/24)
   Public IP address	Create new
   Public IP name	az801l07a-hv-vnet-ip

   Note: The bastion must be created in the same Azure region as the virtual network.

7. On the Review + create tab of the Create a Bastion page, select Create:
   

   Note: Wait for the deployment to complete before you proceed to the next task. The deployment might take about 5 minutes.

Task 3: Deploy a nested VM in the Azure VM

1. In the Azure portal, in the Search resources, services, and docs text box, on the toolbar, search for and select Virtual machines and then, on the Virtual machines page, select az801l07a-hv-vm.
2. On the az801l07a-hv-vm page, select Connect and then, in the drop-down menu, select Bastion.
3. When prompted, provide the following credentials, and then select Connect:
   

   Setting	Value
   User Name	Student
   Password	Pa55w.rd1234

   Note: Edge by default will block popups. To allow popups for Bastion go to Settings in Edge, select Cookies and site permissions on the left, Pop-ups and redirects under All permissions and finally toggle Block (recommended) off.

4. Within the Remote Desktop session to az801l07a-hv-vm, in the Server Manager window, select Local Server, select the On link next to the IE Enhanced Security Configuration label. In the IE Enhanced Security Configuration dialog box, select both Off options, and then select OK.
5. From the Remote Desktop session, open File Explorer and browse to the F: drive. Create two folders F:\VHDs and F:\VMs.
6. Within the Remote Desktop session to az801l07a-hv-vm, start Microsoft Edge, complete the initial setup, go to Windows Server Evaluations, provide the requested information, download the Windows Server 2022 VHD file, and copy it to the F:\VHDs folder.
7. Within the Remote Desktop session to az801l07a-hv-vm, select Start, select Windows Administrative Tools, and then select Hyper-V Manager.
8. In the Hyper-V Manager console, select the az801l07a-hv-vm node.
9. Select New and then, in the cascading menu, select Virtual Machine. This will start the New Virtual Machine Wizard.
10. On the Before You Begin page of the New Virtual Machine Wizard, select Next >.
11. On the Specify Name and Location page of the New Virtual Machine Wizard, specify the following settings and select Next >:
    

    Setting	Value
    Name	az801l07a-vm1
    Store the virtual machine in a different location	selected
    Location	F:\VMs

12. On the Specify Generation page of the New Virtual Machine Wizard, ensure that the Generation 1 option is selected, and then select Next >.
13. On the Assign Memory page of the New Virtual Machine Wizard, set Startup memory to 2048, and then select Next >.
14. On the Configure Networking page of the New Virtual Machine Wizard, in the Connection drop-down list, select NestedSwitch, and then select Next >.
15. On the Connect Virtual Hard Disk page of the New Virtual Machine Wizard, select the option Use an existing virtual hard disk, set location to the VHD file you downloaded to the F:\VHDs folder, and then select Next >.
16. On the Summary page of the New Virtual Machine Wizard, select Finish.
17. In the Hyper-V Manager console, select the newly created virtual machine, and then select Start.
18. In the Hyper-V Manager console, verify that the virtual machine is running, and then select Connect.
19. In the Virtual Machine Connection window to az801l07a-vm1, on the Hi there page, select Next.
20. In the Virtual Machine Connection window to az801l07a-vm1, on the License terms page, select Accept.
21. In the Virtual Machine Connection window to az801l07a-vm1, on the Customize settings page, set the password of the built-in Administrator account to Pa55w.rd, and then select Finish.
22. In the Virtual Machine Connection window to az801l07a-vm1, in the Action menu, select Ctrl + Alt + Delete and then, when prompted, sign in by using the newly set password.
23. In the Virtual Machine Connection window to az801l07a-vm1, select Start. In the Start menu, select Windows PowerShell and then, in the Administrator: Windows PowerShell window, run the following to set the computer name.
    CodeCopy

    Rename-Computer -NewName 'az801l07a-vm1' -Restart
    

Exercise 2: Prepare for assessment and migration by using Azure Migrate

Task 1: Configure Hyper-V environment

1. Within the Remote Desktop session to az801l07a-hv-vm, in the browser window, go to https://aka.ms/migrate/script/hyperv, and download the Azure Migrate configuration PowerShell script.
   

   Note: The script performs the following tasks:

   • Checks that you’re running the script on a supported PowerShell version
   • Verifies that you have administrative privileges on the Hyper-V host
   • Allows you to create a local user account that the Azure Migrate service uses to communicate with the Hyper-V host (This user account is added to Remote Management Users, Hyper-V Administrators, and Performance Monitor Users groups on the Hyper-V host.)
   • Checks that the host is running a supported version of Hyper-V, and the Hyper-V role
   • Enables the WinRM service, and opens ports 5985 (HTTP) and 5986 (HTTPS) on the host (This is required for metadata collection.)
   • Enables PowerShell remoting on the host
   • Checks that the Hyper-V Integration Services is enabled on all VMs managed by the host
   • Enables CredSSP on the host if needed

2. Within the Remote Desktop session to az801l07a-hv-vm, select Start and then select Windows PowerShell ISE.
3. In the Administrator: Windows PowerShell ISE window, on the console pane, run the following commands to copy the script to the C:\Labfiles\Lab07 folder and remove the Zone.Identifier alternate data stream, which, in this case, indicates that the file was downloaded from the Internet:
   CodeCopy

   New-Item -ItemType Directory -Path C:\Labfiles\Lab07 -Force
   Copy-Item -Path "$env:USERPROFILE\Downloads\MicrosoftAzureMigrate-Hyper-V.ps1" -Destination 'C:\Labfiles\Lab07'
   Unblock-File -Path C:\Labfiles\Lab07\MicrosoftAzureMigrate-Hyper-V.ps1
   Set-Location -Path C:\Labfiles\Lab07
   

4. In the Administrator: Windows PowerShell ISE window, open the MicrosoftAzureMigrate-Hyper-V.ps1 script residing in the C:\Labfiles\Lab07 folder and run it. When prompted for confirmation, enter Y and press Enter, with the exception of the following prompts, in which case, enter N and press Enter:
   • Do you use SMB share(s) to store the VHDs?
   • Do you want to create non-administrator local user for Azure Migrate and Hyper-V Host communication?

Task 2: Create an Azure Migrate project

1. Within the Remote Desktop session to az801l07a-hv-vm, in the browser window, go to the Azure portal at https://portal.azure.com/, and sign in by using the credentials of a user account with the Owner role in the subscription you are using in this lab.
2. In the Azure portal, in the Search resources, services, and docs text box, on the toolbar, search for and select Azure Migrate, and then, on the Azure Migrate | Get Started page, in the Servers, databases, and web apps section, select Discover, assess, and migrate.
3. On the Azure Migrate | Servers, databases, and web apps page, select Create Project.
4. On the Create Project page, specify the following settings (leave others with their default values) and select Create:
   

   Setting	Value
   Subscription	the name of the Azure subscription you are using in this lab
   Resource group	the name of a new resource group AZ801-L0702-RG
   Migrate project	az801l07a-migrate-project
   Geography	the name of your country or a geographical region

Task 3: Implement the target Azure environment

1. Within the Remote Desktop session to az801l07a-hv-vm, in the Azure portal, in the Search resources, services, and docs text box, on the toolbar, search for and select Virtual networks. On the Virtual networks page, select + Create on the command bar.
2. On the Basics tab of the Create virtual network page, specify the following settings (leave others with their default values) and select IP Addresses:
   

   Setting	Value
   Subscription	the name of the Azure subscription you are using in this lab
   Resource group	the name of a new resource group AZ801-L0703-RG
   Name	az801l07a-migration-vnet
   Region	the name of the Azure region into which you deployed the virtual machine earlier in this lab

3. On the IP addresses tab of the Create virtual network page, select the ellipsis symbol (…) next to the + add a subnet button, from the dropdown list select Delete address space, select Add an IP address space.
4. On the Add an IP address space page, specify the following settings (leave others with their default values) and select Add:
   

   Setting	Value
   Starting Address	10.7.0.0
   Address space size	/16 (65536 Addresses)

5. On the IP addresses tab of the Create virtual network page, select + Add a subnet.
6. On the Add a subnet page, specify the following settings (leave others with their default values) and select Add:
   

   Setting	Value
   Name	subnet0
   Starting Address	10.7.0.0
   Subnet size	/24 (256 Addresses)

7. Back on the IP addresses tab of the Create virtual network page, select Review + create.
8. On the Review + create tab of the Create virtual network page, select Create.
9. In the Azure portal, browse back to the Virtual networks page, and then, select + Create on the command bar.
10. On the Basics tab of the Create virtual network page, specify the following settings (leave others with their default values) and select IP Addresses:
    

    Setting	Value
    Subscription	the name of the Azure subscription you are using in this lab
    Resource group	AZ801-L0703-RG
    Name	az801l07a-test-vnet
    Region	the name of the Azure region into which you deployed the virtual machine earlier in this lab

11. On the IP addresses tab of the Create virtual network page, select the ellipsis symbol (…) next to the + add a subnet button, from the dropdown list select Delete address space, select Add an IP address space.
12. On the Add an IP address space page, specify the following settings (leave others with their default values) and select Add:
    

    Setting	Value
    Starting Address	10.7.0.0
    Address space size	/16 (65536 Addresses)

13. On the IP addresses tab of the Create virtual network page, select + Add a subnet.
14. On the Add a subnet page, specify the following settings (leave others with their default values) and select Add:
    

    Setting	Value
    Name	subnet0
    Starting Address	10.7.0.0
    Subnet size	/24 (256 Addresses)

15. Back on the IP addresses tab of the Create virtual network page, select Review + create.
16. On the Review + create tab of the Create virtual network page, select Create.
17. In the Azure portal, search for and select Storage accounts. Then, on the Storage accounts page, select + Create on the command bar.
18. On the Basics tab of the Create a storage account page, specify the following settings (leave others with their default values):

1. On the Basics tab of the Create a storage account page, select the Data protection tab.
2. On the Data protection tab of the Create a storage account page, clear the Enable soft delete for blobs and Enable soft delete for containers checkboxes, and then select Review.
3. On the Review tab, select Create.

Exercise 3: Assess Hyper-V for migration by using Azure Migrate

Task 1: Deploy and configure the Azure Migrate appliance

1. Within the Remote Desktop session to az801l07a-hv-vm, in the browser window, in the Azure portal, search for and select Azure Migrate.

2. On the **Azure Migrate

   Get Started** page, in the Servers, databases, and web apps section, select Discover, assess, and migrate.

3. On the Azure Migrate | Servers, databases, and web apps page, in the Azure Migrate: Discovery and Assessment section, select Discover.
4. On the Discover page, ensure that the Discover using appliance option is selected and then, in the Are your servers virtualized? drop-down list, select Yes, with Hyper-V.
5. On the Discover page, in the Name your appliance text box, type az801l07a-vma1 and select the Generate key button.
   

   Note: Wait for the key generation to complete and record its value. You will need it later in this exercise.

6. On the Discover page, in the Download Azure Migrate appliance text box, select the .VHD file option, select Download and then, when prompted, set the download location to the F:\VMs folder.
   

   Note: Wait for the download to complete. This might take about 5 minutes.

7. Once the download completes, extract the content of the downloaded .ZIP file into the F:\VMs folder.
   

   Note: As Microsoft Edge doesn’t prompt by default, you may need to manually copy the .VHD file to the F:\VMs folder.

8. Within the Remote Desktop session to az801l07a-hv-vm, switch to the Hyper-V Manager console, select the AZ801L07A-VM1 node, and then select Import Virtual Machine. This will start the Import Virtual Machine wizard.
9. On the Before You Begin page of the Import Virtual Machine wizard, select Next >.
10. On the Locate Folder page of the Import Virtual Machine wizard, specify the location of the extracted Virtual Machines folder and select Next >.
11. On the Select Virtual Machine page of the Import Virtual Machine wizard, select Next >.
12. On the Choose Import Type page of the Import Virtual Machine wizard, select Register the virtual machine in-place (use the existing unique ID), and then select Next >.
13. On the Configure Processor page of the Import Virtual Machine wizard, set Number of virtual processors to 4, and then select Next >.
    

    Note: In a lab environment, you can ignore any error messages referring to the change of the number of virtual processors. In production scenarios, you should ensure that the virtual appliance has the sufficient number of compute resources assigned to it.

14. On the Connect Network page of the Import Virtual Machine wizard, in the Connection drop-down list, select NestedSwitch, and then select Next >.
15. On the Summary page of the Import Virtual Machine wizard, select Finish.
    

    Note: Wait for the import to complete.

16. In the Hyper-V Manager console, select the newly imported virtual machine, select Rename, and then set its name to az801l07a-vma1.
17. Increase the memory size of the virtual machine to 4096 MB.
18. In the Hyper-V Manager console, select the newly imported virtual machine, and then select Start.
19. In the Hyper-V Manager console, verify that the virtual machine is running, and then select Connect.
20. In the Virtual Machine Connection window to the virtual appliance, on the License terms page, select Accept.
21. In the Virtual Machine Connection window to the virtual appliance, on the Customize settings page, set the password of the built-in Administrator account to Pa55w.rd, and then select Finish.
22. In the Virtual Machine Connection window to the virtual appliance, in the Action menu, select Ctrl + Alt + Delete and then, when prompted, sign in by using the newly set password.
    

    Note: Within the Virtual Machine Connection window to the virtual appliance, a browser window displaying Appliance Configuration Manager will automatically open.

23. On the Appliance Configuration Manager page, select the I agree button and wait for the setup prerequisites to be successfully verified.
24. On the Appliance Configuration Manager page, in the Register with Azure Migrate section, in the Register Hyper-V appliance by pasting the key here text box, paste the key you copied into Notepad earlier in this exercise, select Login, and then select Copy code & login. This will automatically open a new browser tab prompting you to enter the copied code.
25. On the Enter code pane in the newly opened browser tab, paste the code you copied onto the Clipboard, and then select Next. When prompted, sign in by providing the credentials of a user account with the Owner role in the subscription you are using in this lab.
26. When prompted Are you trying to sign in to Microsoft Azure PowerShell?, select Continue, and then close the newly opened browser tab.
27. In the browser window, on the Appliance Configuration Manager page, verify that registration was successful.
28. On the Appliance Configuration Manager page, in the Manage credentials and discovery sources section, select Add credentials. On the Add credentials pane, specify the following settings, and then select Save:
    

    Setting	Value
    Friendly Name	az801l07ahvcred
    User Name	Student
    Password	Pa55w.rd1234

29. Within the browser window, on the Appliance Configuration Manager page, in the Provide Hyper-V host/cluster details section, select Add discovery source. On the Add discovery source pane, select the Add single item option. Ensure that the Discovery source drop-down list is set to Hyper-V Host/Cluster. In the Map credentials drop-down list, select the az801l07ahvcred entry, in the IP address /FQDN text box, type 10.0.2.1, and then select Save.
    

    Note: 10.0.2.1 is the IP address of the network interface of the Hyper-V host attached to the internal switch.

30. On the Appliance Configuration Manager page, in the Provide Hyper-V host/cluster details section, enable the toggle button for Disable the slider if you don’t want to perform these features, and then select Start discovery.
    

    Note: It might take about 15 minutes per host for metadata of discovered servers to appear in the Azure portal.

Task 2: Configure, run, and view an assessment

1. From the Virtual Machine Connection window to the virtual appliance, switch to the Remote Desktop session to az801l07a-hv-vm. In the browser window displaying the Azure portal, browse back to the **Azure Migrate

   Servers, databases and web apps** page and select Refresh. In the Azure Migrate: Discovery and assessment section, select Assess and then, in the drop-down menu, select Azure VM.

2. On the Basics tab of the Create assessment page, next to the Assessment settings label, select Edit.
3. On the Assessment settings page, specify the following settings (leave others with their default values) and select Save:
   

   Setting	Value
   Target location	the name of the Azure region you are using in this lab
   Storage type	Premium managed disks
   Reserved instances	No reserved instances
   Sizing criteria	As on premises
   VM series	Dsv3_series
   Comfort factor	1
   Offer	Pay-As-You-Go
   Currency	US Dollar ($)
   Discount	0
   VM uptime	31 Day(s) per month and 24 Hour(s) per day

   Note: Considering the limited time inherent to the lab environment, the only viable option in this case is an As on-premises assessment.

4. Back on the Basics tab of the Create assessment page, select Next to display the Select servers to assess tab.
5. On the Select servers to assess tab, set Assessment name to az801l07a-assessment.
6. Ensure that the Create new option of the Select or create a group setting is selected, set the group name to az801l07a-assessment-group, and then, in the list of machines to be added to the group, select az801l07a-vm1.
7. Select Next and then select Create assessment.
8. Back on the Azure Migrate | Servers, databases and web apps page, select Refresh. In the Azure Migrate: Discovery and Assessment section, verify that the Assessments Total line contains the 1 entry, and select it.
9. On the Azure Migrate: Discovery and Assessment | Assessments page, select the newly created assessment az801l07a-assessment.
10. On the az801l07a-assessment page, review the information indicating Azure readiness and monthly cost estimate for both compute and storage.
    

    Note: In real-world scenarios, you should consider installing the Dependency agent to provide more insights into server dependencies during the assessment stage.

Exercise 4: Migrate Hyper-V VMs by using Azure Migrate

Task 1: Prepare for migration of Hyper-V VMs

1. Within the Remote Desktop session to az801l07a-hv-vm, in the browser window displaying the Azure portal, browse back to the **Azure Migrate

   Servers, databases and web apps** page.

2. On the **Azure Migrate

   Servers, databases and web apps** page, in the Migration and modernization section, select the Discover link.

3. On the Discover page, specify the following settings (leave others with their default values) and select Create resources:
   

   Setting	Value
   Are your machines virtualized?	Yes, with Hyper-V
   Target region	the name of the Azure region you are using in this lab
   Confirm the target region for migration	selected

   Note: This step automatically triggers provisioning of an Azure Site Recovery vault.

4. On the Discover page, in step 1. Prepare Hyper-V host servers, select the first Download link (not the Download button), in order to download the Hyper-V replication provider software installer.
   

   Note: If you receive a browser notification that says AzureSiteRecoveryProvider.exe can’t be downloaded securely, display the context-sensitive menu of the Download link and then, in the menu, select Copy link. Open another tab in the same browser window, paste the link you copied, and then press Enter.

5. Once the download completes, select the Open file link in the browser Downloads section. This will start the Azure Site Recovery Provider Setup (Hyper-V server) wizard.
6. On the Microsoft Update page of the Azure Site Recovery Provider Setup (Hyper-V server) wizard, select Off, and then select Next.
7. On the Provider installation page of the Azure Site Recovery Provider Setup (Hyper-V server) wizard, select Install.
8. Switch to the Azure portal and then, on the Discover machines page, in step 1 of the procedure for preparing on-premises Hyper-V hosts, select the Download button in order to download the vault registration key.
9. Switch to the Provider installation page of the Azure Site Recovery Provider Setup (Hyper-V server) wizard and select Register. This will start the Microsoft Azure Site Recovery Registration Wizard.
10. On the Vault Settings page of the Microsoft Azure Site Recovery Registration Wizard, select Browse, browse to the Downloads folder, select the vault credentials file, and then select Open.
11. Back on the Vault Settings page of the Microsoft Azure Site Recovery Registration Wizard, select Next.
12. On the Proxy Settings page of the Microsoft Azure Site Recovery Registration Wizard, accept the default settings and select Next.
13. On the Registration page of the Microsoft Azure Site Recovery Registration Wizard, select Finish.

14. Refresh the browser window displaying the Discover page. This will redirect you to the **Azure Migrate

    Servers, databases and web apps** page.

15. On the **Azure Migrate

    Servers, databases and web apps** page, in the Migration and modernization section, select the Discover link.

16. On the Discover page, select Finalize registration.
    

    Note: It might take up to 15 minutes for the discovery of virtual machines to complete.

Task 2: Configure replication of Hyper-V VMs

1. Once you receive the confirmation that the registration was finalized, browse back to the **Azure Migrate

   Servers, databases and web apps** page and then, in the Migration and modernization section, select the Replicate link.

   Note: You might have to refresh the browser page displaying the **Azure Migrate

   Servers, databases and web apps** page.

2. On the Specify intent page, select Continue. On the Basics tab of the Replicate page, in the Are your machines virtualized? drop-down list, select Yes, with Hyper-V and then select Next.
3. On the Virtual machines tab of the Replicate page, specify the following settings (leave others with their default values) and select Next:
   

   Setting	Value
   Import migration settings from an Azure Migrate assessment	Yes, apply migration settings from an Azure Migrate assessment
   Select group	az801l07a-assessment-group
   Select assessment	az801l07a-assessment
   Virtual machines	az801l07a-vm1

4. On the Target settings tab of the Replicate page, specify the following settings (leave others with their default values) and select Next:
   

   Setting	Value
   Subscription	the name of the Azure subscription you are using in this lab
   Resource group	AZ801-L0703-RG
   Replication Storage Account	the name of the storage account you created earlier in this lab
   Virtual Network	az801l07a-migration-vnet
   Subnet	subnet0

5. On the Compute tab of the Replicate page, ensure that the Standard_D2s_v3 is selected in the Azure VM Size drop-down list. In the OS Type drop-down list, select Windows and then select Next.
6. On the Disks tab of the Replicate page, accept the default settings and select Next.
7. On the Tags tab of the Replicate page, accept the default settings and select Next.
8. On the Review + Start replication tab of the Replicate page, select Replicate.

9. To monitor the status of replication, back on the **Azure Migrate

   Servers, databases and web apps** page, select Refresh and then, in the Migration and modernization section, select the Replicating servers entry. On the **Migration and modernization

   Replicating machines** page, examine the Status column in the list of the replicating machines.

10. Wait until the status changes to Protected. This might take additional 15 minutes.
    

    Note: You will need to to refresh the **Migration and modernization

    Replicating machines** to update the Status information.

Task 3: Perform migration of Hyper-V VMs

1. In the Azure portal, on the **Migration and modernization

   Replicating machines** page, select the entry representing the az801l07a-vm1 virtual machine.

2. On the az801l07a-vm1 page, select Test migration.
3. On the Test migration page, in the Virtual network drop-down list, select az801l07a-test-vnet and then select Test migration.
   

   Note: Wait for the test migration to complete. This might take about 5 minutes.

4. In the Azure portal, in the Search resources, services, and docs text box, on the toolbar, search for and select Virtual machines and then, on the Virtual machines page, note the entry representing the newly replicated virtual machine az801l07a-vm1-test.
   

   Note: Initially, the virtual machine will have the name consisting of the asr- prefix and randomly generated suffix, but will be renamed eventually to az801l07a-vm1-test.

5. In the Azure portal, browse back to the **Migration and modernization

   Replicating machines** page, select Refresh, and then verify that the az801l07a-vm1 virtual machine is listed with the Cleanup test failover pending status.

6. On the **Migration and modernization

   Replicating machines** page, select the entry representing the az801l07a-vm1 virtual machine.

7. On the az801l07a-vm1 replicating machines page, select Clean up test migration.
8. On the Test migrate cleanup page, select the checkbox Testing is complete. Delete test virtual machine and then select Cleanup Test.
9. Once the test failover cleanup job completes, refresh the browser page displaying the az801l07a-vm1 replicating machines page and note that the Migrate icon in the toolbar automatically becomes available.
10. On the az801l07a-vm1 replicating machines page, select the Migrate link.
11. On the Migrate page, ensure that Yes is selected in the Shutdown virtual machines and perform a planned migration with no data loss? drop-down list, and then select Migrate.

12. To monitor the status of migration, browse back to the **Azure Migrate

    Servers, databases and web apps** page. In the Migration and modernization section, select the Replicating servers entry and then, on the **Migration and modernization

    Replicating machines** page, examine the Status column in the list of the replicating machines. Verify that the status displays the Planned failover finished status.

    Note: Migration is supposed to be a non-reversible action. If you want to see the completed information, browse back to the **Azure Migrate

    Servers, databases and web apps** page, refresh the page, and then verify that the Migrated Servers entry in the Migration and modernization section has the value of 1.

Task 4: Remove Azure resources deployed in the lab

1. On SEA-SVR2, in the browser window displaying the Azure portal, open the Azure Cloud Shell pane by selecting the Cloud Shell button in the Azure portal.
2. If prompted to select either Bash or PowerShell, select PowerShell.
   

   Note: If this is the first time you’re starting Cloud Shell and you’re presented with the You have no storage mounted message, select the subscription you are using in this lab, and then select Create storage.

3. From the Cloud Shell pane, run the following command to list all the resource groups you created in this lab:
   CodeCopy

   Get-AzResourceGroup -Name 'AZ801-L070*'
   

   Note: Verify that the output contains only the resource group you created in this lab. This group will be deleted in this task.

4. From the Cloud Shell pane, run the following to delete the resource group you created in this lab:
   CodeCopy

   Get-AzResourceGroup -Name 'AZ801-L070*' | Remove-AzResourceGroup -Force -AsJob
   

   Note: The command executes asynchronously (as determined by the -AsJob parameter), so while you will be able to run another PowerShell command immediately after within the same PowerShell session, it will take a few minutes before the resource groups are actually removed.