Lab 08 – Manage Virtual Machines

Lab introduction

In this lab, you create and compare virtual machines to virtual machine scale sets. You learn how to create, configure and resize a single virtual machine. You learn how to create a virtual machine scale set and configure autoscaling.

This lab requires an Azure subscription. Your subscription type may affect the availability of features in this lab. You may change the region, but the steps are written using East US.

Estimated timing: 50 minutes

Lab scenario

Your organization wants to explore deploying and configuring Azure virtual machines. First, you implement an Azure virtual machine with manual scaling. Next, you implement a Virtual Machine Scale Set and explore autoscaling.

Interactive lab simulations

There are interactive lab simulations that you might find useful for this topic. The simulation lets you to click through a similar scenario at your own pace. There are differences between the interactive simulation and this lab, but many of the core concepts are the same. An Azure subscription is not required.

Job skills

  • Task 1: Deploy zone-resilient Azure virtual machines by using the Azure portal.
  • Task 2: Manage compute and storage scaling for virtual machines.
  • Task 3: Create and configure Azure Virtual Machine Scale Sets.
  • Task 4: Scale Azure Virtual Machine Scale Sets.
  • Task 5: Create a virtual machine using Azure PowerShell (optional 1).
  • Task 6: Create a virtual machine using the CLI (optional 2).

Azure Virtual Machines Architecture Diagram

Diagram of the vm architecture tasks.

Task 1: Deploy zone-resilient Azure virtual machines by using the Azure portal

In this task, you will deploy two Azure virtual machines into different availability zones by using the Azure portal. Availability zones offer the highest level of uptime SLA for virtual machines at 99.99%. To achieve this SLA, you must deploy at least two virtual machines across different availability zones.

  1. Sign in to the Azure portal – https://portal.azure.com.
  2. Search for and select Virtual machines, on the Virtual machines blade, click + Create, and then select in the drop-down + Azure virtual machine. Notice your other choices.
  3. On the Basics tab, in the Availability zone drop down menu, place a checkmark next to Zone 2. This should select both Zone 1 and Zone 2.

    Note: This will deploy two virtual machines in the selected region, one in each zone. You achieve the 99.99% uptime SLA because you have at least two VMs distributed across at least two zones. In the scenario where you might only need one VM, it is a best practice to still deploy the VM to another zone.

  4. On the Basics tab, continue completing the configuration:
    SettingValue
    Subscriptionthe name of your Azure subscription
    Resource groupaz104-rg8 (If necessary, click Create new)
    Virtual machine namesaz104-vm1 and az104-vm2 (After selecting both availability zones, select Edit names under the VM name field.)
    RegionEast US
    Availability optionsAvailability zone
    Availability zoneZone 1, 2 (read the note about using virtual machine scale sets)
    Security typeStandard
    ImageWindows Server 2019 Datacenter – x64 Gen2
    Azure Spot instanceunchecked
    SizeStandard D2s v3
    Usernamelocaladmin
    PasswordProvide a secure password
    Public inbound portsNone
    Would you like to use an existing Windows Server license?Unchecked

    Screenshot of the create vm page.

  5. Click Next: Disks > , specify the following settings (leave others with their default values):
    SettingValue
    OS disk typePremium SSD
    Delete with VMchecked (default)
    Enable Ultra Disk compatibilityUnchecked
  6. Click Next: Networking > take the defaults but do not provide a load balancer.
    SettingValue
    Delete public IP and NIC when VM is deletedChecked
    Load balancing optionsNone
  7. Click Next: Management > and specify the following settings (leave others with their default values):
    SettingValue
    Patch orchestration optionsAzure orchestrated
  8. Click Next: Monitoring > and specify the following settings (leave others with their default values):
    SettingValue
    Boot diagnosticsDisable
  9. Click Next: Advanced >, take the defaults, then click Review + Create.
  10. After the validation, click Create.

    Note: Notice as the virtual machine deploys the NIC, disk, and public IP address (if configured) are independently created and managed resources.

  11. Wait for the deployment to complete, then select Go to resource.

    Note: Monitor the Notification messages.

Task 2: Manage compute and storage scaling for virtual machines

In this task, you will scale a virtual machine by adjusting its size to a different SKU. Azure provides flexibility in VM size selection so that you can adjust a VM for periods of time if it needs more (or less) compute and memory allocated. This concept is extended to disks, where you can modify the performance of the disk, or increase the allocated capacity.

  1. On the az104-vm1 virtual machine, in the Availability + scale blade, select Size.
  2. Set the virtual machine size to DS1_v2 and click Resize. When prompted, confirm the change.

    Note: Choose another size if Standard DS1_v2 is not available. Resizing is also known as vertical scaling, up or down.

    Screenshot of the resize the virtual machine.

  3. In the Settings area, select Disks.
  4. Under Data disks select + Create and attach a new disk. Configure the settings (leave other settings at their default values).
    SettingValue
    Disk namevm1-disk1
    Storage typeStandard HDD
    Size (GiB)32
  5. Click Apply.
  6. After the disk has been created, click Detach (if necessary, scroll to the right to view the detach icon), and then click Apply.

    Note: Detaching removes the disk from the VM but keeps it in storage for later use.

  7. Search for and select Disks. From the list of disks, select the vm1-disk1 object.

    Note: The Overview blade also provides performance and usage information for the disk.

  8. In the Settings blade, select Size + performance.
  9. Set the storage type to Standard SSD, and then click Save.
  10. Navigate back to the az104-vm1 virtual machine and select Disks.
  11. In the Data disk section, select Attach existing disks.
  12. In the Disk name drop-down, select VM1-DISK1.
  13. Verify the disk is now Standard SSD.
  14. Select Apply to save your changes.

    Note: You have now created a virtual machine, scaled the SKU and the data disk size. In the next task we use Virtual Machine Scale Sets to automate the scaling process.

Azure Virtual Machine Scale Sets Architecture Diagram

Diagram of the vmss architecture tasks.

Task 3: Create and configure Azure Virtual Machine Scale Sets

In this task, you will deploy an Azure virtual machine scale set across availability zones. VM Scale Sets reduce the administrative overhead of automation by enabling you to configure metrics or conditions that allow the scale set to horizontally scale, scale in or scale out.

  1. In the Azure portal, search for and select Virtual machine scale sets and, on the Virtual machine scale sets blade, click + Create.
  2. On the Basics tab of the Create a virtual machine scale set blade, specify the following settings (leave others with their default values) and click Next : Spot >:
    SettingValue
    Subscriptionthe name of your Azure subscription
    Resource groupaz104-rg8
    Virtual machine scale set namevmss1
    Region(US)East US
    Availability zoneZones 1, 2, 3
    Orchestration modeUniform
    Security typeStandard
    ImageWindows Server 2019 Datacenter – x64 Gen2
    Run with Azure Spot discountUnchecked
    SizeStandard D2s_v3
    Usernamelocaladmin
    PasswordProvide a secure password
    Already have a Windows Server license?Unchecked

    Note: For the list of Azure regions which support deployment of Windows virtual machines to availability zones, refer to What are Availability Zones in Azure?

    Screenshot of the create vmss page.

  3. On the Spot tab, accept the defaults and select Next: Disks >.
  4. On the Disks tab, accept the default values and click Next : Networking >.
  5. On the Networking page, click the Create virtual network link below the Virtual network textbox and create a new virtual network with the following settings (leave others with their default values). When finished, select OK.
    SettingValue
    Namevmss-vnet
    Address range10.82.0.0/20 (change what is there)
    Subnet namesubnet0
    Subnet range10.82.0.0/24
  6. In the Networking tab, click the Edit network interface icon to the right of the network interface entry.
  7. For NIC network security group section, select Advanced and then click Create new under the Configure network security group drop-down list.
  8. On the Create network security group blade, specify the following settings (leave others with their default values):
    SettingValue
    Namevmss1-nsg
  9. Click Add an inbound rule and add an inbound security rule with the following settings (leave others with their default values):
    SettingValue
    SourceAny
    Source port ranges*
    DestinationAny
    ServiceHTTP
    ActionAllow
    Priority1010
    Nameallow-http
  10. Click Add and, back on the Create network security group blade, click OK.
  11. In the Edit network interface blade, in the Public IP address section, click Enabled and click OK.
  12. In the Networking tab, under the Load balancing section, specify the following (leave others with their default values).
    SettingValue
    Load balancing optionsAzure load balancer
    Select a load balancerCreate a load balancer
  13. On the Create a load balancer page, specify the load balancer name and take the defaults. Click Create when you are done then Next : Scaling >.
    SettingValue
    Load balancer namevmss-lb

    Note: Pause for a minute and review what you done. At this point, you have configured the virtual machine scale set with disks and networking. In the network configuration you have created a network security group and allowed HTTP. You have also created a load balancer with a public IP address.

  14. On the Scaling tab, specify the following settings (leave others with their default values) and click Next : Management >:
    SettingValue
    Initial instance count2
    Scaling policyManual
  15. On the Management tab, specify the following settings (leave others with their default values):
    SettingValue
    Boot diagnosticsDisable
  16. Click Next : Health >.
  17. On the Health tab, review the default settings without making any changes and click Next : Advanced >.
  18. On the Advanced tab, click Review + create.
  19. On the Review + create tab, ensure that the validation passed and click Create.

    Note: Wait for the virtual machine scale set deployment to complete. This should take approximately 5 minutes. While you wait review the documentation.

Task 4: Scale Azure Virtual Machine Scale Sets

In this task, you scale the virtual machine scale set using a custom scale rule.

  1. Select Go to resource or search for and select the vmss1 scale set.
  2. Choose Scaling from the menu on the left-hand side of the scale set window.

Did you know? You can Manual scale or Custom autoscale. In scale sets with a small number of VM instances, increasing or decreasing the instance count (Manual scale) may be best. In scale sets with a large number of VM instances, scaling based on metrics (Custom autoscale) may be more appropriate.

Scale out rule

  1. Select Custom autoscale. then change the Scale mode to Scale based on metric. And then select Add rule.
  2. Let’s create a rule that automatically increases the number of VM instances. This rule scales out when the average CPU load is greater than 70% over a 10-minute period. When the rule triggers, the number of VM instances is increased by 20%.
    SettingValue
    Metric sourceCurrent resource (vmss1)
    Metric namespaceVirtual Machine Host
    Metric namePercentage CPU (review your other choices)
    OperatorGreater than
    Metric threshold to trigger scale action70
    Duration (minutes)10
    Time grain statisticAverage
    OperationIncrease percent by (review other choices)
    Cool down (minutes)5
    Percentage20

    Screenshot of the scaling add rule page.

  3. Be sure to Save your changes.

Scale in rule

  1. During evenings or weekends, demand may decrease so it is important to create a scale in rule.
  2. Let’s create a rule that decreases the number of VM instances in a scale set. The number of instances should decrease when the average CPU load drops below 30% over a 10-minute period. When the rule triggers, the number of VM instances is decreased by 20%.
  3. Select Add a rule, adjust the settings, then select Add.
    SettingValue
    OperatorLess than
    Threshold30
    Operationdecrease percentage by (review your other choices)
    Percentage20
  4. Be sure to Save your changes.

Set the instance limits

  1. When your autoscale rules are applied, instance limits make sure that you do not scale out beyond the maximum number of instances or scale in beyond the minimum number of instances.
  2. Instance limits are shown on the Scaling page after the rules.
    SettingValue
    Minimum2
    Maximum10
    Default2
  3. Be sure to Save your changes
  4. On the vmss1 page, select Instances. This is where you would monitor the number of virtual machine instances.

    Note: If you are interested in using Azure PowerShell for virtual machine creation, try Task 5. If you are interested in using the CLI to create virtual machines, try Task 6.

Task 5: Create a virtual machine using Azure PowerShell (option 1)

  1. Use the icon (top right) to launch a Cloud Shell session. Alternately, navigate directly to https://shell.azure.com.
  2. Be sure to select PowerShell. If necessary, use the Show advanced settings and configure the shell storage.
  3. Run the following command to create a virtual machine. When prompted, provide a username and password for the VM. While you wait check out the New-AzVM command reference for all the parameters associated with creating a virtual machine.
    Code
     New-AzVm `
     -ResourceGroupName 'az104-rg8' `
     -Name 'myPSVM' `
     -Location 'East US' `
     -Image 'Win2019Datacenter' `
     -Zone '1' `
     -Size 'Standard_D2s_v3' ` 
     -Credential (Get-Credential)
    
  4. Once the command completes, use Get-AzVM to list the virtual machines in your resource group.
    Code
     Get-AzVM `
     -ResourceGroupName 'az104-rg8' `
     -Status
    
  5. Verify your new virtual machine is listed and the Status is Running.
  6. Use Stop-AzVM to deallocate your virtual machine. Type Yes to confirm.
    Code
     Stop-AzVM `
     -ResourceGroupName 'az104-rg8' `
     -Name 'myPSVM' 
    
  7. Use Get-AzVM with the -Status parameter to verify the machine is deallocated.

    Did you know? When you use Azure to stop your virtual machine, the status is deallocated. This means that any non-static public IPs are released, and you stop paying for the VM’s compute costs.

Task 6: Create a virtual machine using the CLI (option 2)

  1. Use the icon (top right) to launch a Cloud Shell session. Alternately, navigate directly to https://shell.azure.com.
  2. Be sure to select Bash. If necessary, use the Show advanced settings and configure the shell storage.
  3. Run the following command to create a virtual machine. When prompted, provide a username and password for the VM. While you wait check out the az vm create command reference for all the parameters associated with creating a virtual machine.
    Shell
     az vm create --name myCLIVM --resource-group az104-rg8 --image Ubuntu2204 --admin-username localadmin --generate-ssh-keys
    
  4. Once the command completes, use az vm show to verify your machine was created.
    Shell
     az vm show --name  myCLIVM --resource-group az104-rg8 --show-details
    
  5. Verify the powerState is VM Running.
  6. Use az vm deallocate to deallocate your virtual machine. Type Yes to confirm.
    Shell
     az vm deallocate --resource-group az104-rg8 --name myCLIVM
    
  7. Use az vm show to ensure the powerState is VM deallocated.

    Did you know? When you use Azure to stop your virtual machine, the status is deallocated. This means that any non-static public IPs are released, and you stop paying for the VM’s compute costs.

Cleanup your resources

If you are working with your own subscription take a minute to delete the lab resources. This will ensure resources are freed up and cost is minimized. The easiest way to delete the lab resources is to delete the lab resource group.

  • In the Azure portal, select the resource group, select Delete the resource groupEnter resource group name, and then click Delete.
  • Using Azure PowerShell, Remove-AzResourceGroup -Name resourceGroupName.
  • Using the CLI, az group delete --name resourceGroupName.

Key takeaways

Congratulations on completing the lab. Here are the main takeaways for this lab.

  • Azure virtual machines are on-demand, scalable computing resources.
  • Azure virtual machines provide both vertical and horizontal scaling options.
  • Configuring Azure virtual machines includes choosing an operating system, size, storage and networking settings.
  • Azure Virtual Machine Scale Sets let you create and manage a group of load balanced VMs.
  • The virtual machines in a Virtual Machine Scale Set are created from the same image and configuration.
  • In a Virtual Machine Scale Set the number of VM instances can automatically increase or decrease in response to demand or a defined schedule.

Learn more with self-paced training

Leave A Comment

Certifs IT Library

Explore our comprehensive web library to Find a wealth of invaluable resources, including extensive documentation and hands-on labs.

Inscription ouverte pour la formation Vmware VCP-DCV 2024
Mai 2024